An online shopper cannot pick up your product, turn it over or feel the fabric. The photographs do that work for them. If the pictures are dark, inconsistent or misleading, the shopper either leaves or buys and then returns the item, and both outcomes cost you.

This guide is for small brands, D2C founders and marketplace sellers in India who want product photos that are accurate, consistent and accepted by the platforms they sell on. It covers what to shoot, what the marketplaces ask for, a setup you can build on a table at home, lighting for difficult products, editing that stays honest, and a checklist to run before every upload.

Plan the image set before you touch the camera

Most listings need more than one photo, and each photo should answer a different question a shopper has. Decide the set for each product type once, write it down, and reuse it so every listing in your catalogue looks like it belongs to the same shop.

A practical image set for most products:

  1. Main image. The whole product, front-on or at a slight angle, on a plain background. This is the thumbnail people see in search results.
  2. Alternate angles. Back, side, top or underside, wherever a buyer would look in a shop.
  3. Detail shots. Stitching, texture, ports, clasps, the label or ingredients panel.
  4. Scale. The product in a hand, on a desk or next to a familiar object, so size is obvious.
  5. In use. The kurta worn, the lamp switched on, the bag carried. This is where a lifestyle setting helps.
  6. What is in the box. Every item the buyer will actually receive, and nothing they will not.

What the marketplaces ask for

Every platform publishes its own image rules, and they change. Treat the summary below as a starting point, then read the current rules in your own seller account before a shoot, because category-specific guides can add to or override the general rules.

PlatformMain image points (as published)Where to check
AmazonPure white background (RGB 255, 255, 255); product fills most of the frame; at least 1,000 px on the longest side for zoomSeller Central help and category style guides
Google Merchant CenterClear view of the actual product; no promotional text, watermarks or borders; minimum 500 x 500 px for all products from 31 January 2027Merchant Center help, image link attribute
Flipkart and other Indian marketplacesCategory-wise rules set inside the seller platformYour seller dashboard and its learning resources

Amazon. Amazon staff posting in Amazon's own seller forums describe the main image standard as a pure white background with the product filling roughly 85% or more of the frame, at least 1,000 pixels on the longest side so shoppers can zoom, with 1,600 pixels or more described as better. JPEG is the preferred format, and PNG, TIFF and GIF are also accepted. The main image should not carry added text, graphics or watermarks, should not be an illustration, and should not include props or accessories that are not part of the purchase.

Google Merchant Center. If you list products on Google, the main image you submit through the image link attribute must show the actual product. Google's help page lists what is not allowed: promotional overlays (prices, calls to action, shipping or warranty claims), watermarks, superimposed logos or store names, borders, placeholders and generic graphics. It recommends that the product fill between 75% and 90% of the frame, suggests around 1,500 x 1,500 pixels for best results, caps files at 64 megapixels and 16 MB, and states that from 31 January 2027 the minimum for all products will be 500 x 500 pixels.

Flipkart and other Indian marketplaces. These platforms also set image rules, often category by category, and enforce them when listings are reviewed. We could not verify a current public version of Flipkart's image specification, so read the rules for your category inside your seller account rather than relying on second-hand checklists online.

A simple setup that works on a table

You do not need a studio to produce clean catalogue images. Small brands across India shoot good work on a dining table next to a window. What matters is control: the same light, the same distance and the same background for every product.

ItemWhy it helpsLow-cost alternative
Sturdy table near a windowLarge, soft natural lightAny flat surface by a north- or east-facing window
White paper sweepSeamless background with no horizon lineA roll of chart paper taped to a wall and table
DiffuserSoftens harsh light and shadowsTracing paper or a thin white cloth over the window
White reflectorLifts shadows on the side away from the lightWhite foam board or card
TripodKeeps framing identical across productsA stack of books and the self-timer
One or two continuous lightsConsistent light at any time of dayTwo identical daylight LED panels

Phones are capable of excellent product images in good light. A camera with interchangeable lenses helps most with very small items, reflective products and large batches where you need to tether to a laptop. Whichever you use, lock the exposure and white balance so they do not drift between shots.

Lighting by product type

Most problems in product photos are lighting problems. The table below covers the categories that cause the most retakes.

ProductCommon problemWhat to try
Glossy or metal (steel bottles, cookware)Mirror-like reflections of the roomLarge diffused light; surround with white card; check the reflection, not just the product
Glass and clear plasticProduct disappears into the backgroundLight from behind or the sides through a diffuser; black card at the edges to define outlines
JewelleryTiny details, glare, dustMacro lens or close focus; soft light from two sides; clean with a blower and gloves
Textiles and sareesColour shifts; texture lostSoft side light to show weave; grey card for white balance; shoot colour variants in one session
Dark productsShape merges into shadowAdd a rim light or white card behind to separate edges
White products on whiteProduct edges vanishSlightly underexpose the product, then clean the background in editing

Camera settings and consistency

Consistency is what makes a catalogue look professional. A shopper scrolling a category page notices when one product is warmer, smaller or shot from a different height than the next.

  • Fix the camera position. Mark the tripod legs and the product's spot on the table with tape.
  • Use manual exposure. Auto exposure brightens dark products and darkens white ones, which makes colours inconsistent.
  • Set white balance once. Photograph a grey card or plain white sheet at the start of each session and use it as the reference.
  • Choose an aperture for depth. For small products, a middle aperture keeps the whole item sharp from front to back; very wide apertures blur the far edge.
  • Keep the lens length the same. Changing focal length changes perspective, so the same box can look deeper or flatter between listings.
  • Shoot a little wider than the final crop. Leaving space lets you crop to each platform's frame-fill guidance without losing edges.

Editing without misrepresenting the product

Editing should make the photo accurate, not make the product look better than it is. A photo that misleads leads to returns, poor reviews and, on marketplaces, listing problems.

Reasonable edits include cleaning the background to pure white where a platform asks for it, removing dust and stray threads, straightening, cropping and correcting colour so it matches the product in daylight. Changing the product's shape, hiding defects, adding items that are not included or pasting promotional text onto the main image are the edits that cause trouble.

Background removal, batch colour correction and resizing are the most repetitive parts of the job, and most photo editors and online design tools can automate them. Build a preset for each product category so the same corrections are applied every time.

File names, sizes and alt text

Your own website needs the same care as a marketplace listing. Google's guidance on images in search recommends short, descriptive file names rather than camera defaults, useful alt text that describes the image without stuffing keywords, and placing images near the text they relate to. It also notes that images are often the heaviest part of a page, so compress them for speed.

A simple convention: product-colour-view.jpg, for example steel-bottle-750ml-blue-front.jpg. Alt text describes what a shopper would see: "Blue 750 ml steel water bottle with bamboo lid, front view". Keep a master folder of full-resolution originals, and export platform-specific copies from it.

Pre-upload checklist

Print this and tick it for each product before you publish.

  • Main image shows only the product, on the background the platform asks for
  • Product fills the frame as the platform recommends, with no edges cut off
  • Image meets the current minimum size and format for the platform and category
  • No added text, watermark, border or logo on the main image
  • Colours checked against the real product in daylight
  • Alternate angles, detail, scale and in-use shots included
  • "In the box" image shows exactly what the buyer receives
  • All colour variants shot with the same light, distance and angle
  • Files named descriptively, with alt text written for your own site
  • Full-resolution originals backed up in two places

Where this fits in your wider marketing

Product images are not only for the listing page. The same shoot can supply social posts, ads and email banners if you plan a few lifestyle frames alongside the catalogue set. Our guides on visual storytelling in digital marketing and building a social media content strategy show how to make one shoot go further, and how professional photography strengthens brand identity explains why consistency across channels matters.

If you handle editing yourself, Fliqa Studio, part of the FliqaIndia group, is an online tool for photo editing and background removal. For commissioned shoots, see the group's photography services.